DIY Memory Wire Bracelet Tutorial

Create your own stylish bracelets using Swarovski crystals, beads, and memory wire with this easy DIY memory wire bracelet tutorial.

Supplies:
Beadalon Memory Wire
Assorted Swarovski Crystals
Assorted Beads
Jump Rings
Assorted Charms (optional)

Tools:
Round Nose Pliers
Long Nose Pliers
Wire Cutters

Step 1:
Using the wire cutters, cut the memory wire to the length desired.

Step 2:
Use the round nose pliers to form a loop on one end of the wire.  You can do this by making a 90 degree bend on one end of the wire, leaving enough wire to create the loop.  Use the round nose pliers to bend the end wire into a loop.

Step 3:
Slide on the Swarovski Crystals and beads onto the other end of the memory wire.  As you load them, try to create various patterns by changing the way you load the beads and crystals on each loop of the memory wire.

Step 4:
Use the round nose pliers to form a loop on the other end of the wire.

Step 5:
To finish, use both pliers to carefully open a jump ring by twisting each side opposite directions.  Use the jump ring to add a charm to one of the end loops and close the rings by twisting the sides back together carefully.

DIY Valentine Paperclip Tutorial

Valentines Day Paperclip Project – this is a quick and easy project that requires very little supplies. With all the sales at Michaels, Target and JoAnns, these DIY paper clip Valentines are a really inexpensive way to give someone Valentine themed gift or just to add to a card.   This easy to do Valentines Day Craft Project was quite affordable to do.  I spent around $2.00 total on supplies and was able to make 20 paper clips.

Supplies:

Foam Sticker ¼” to 1/3” in thickness

1 piece of Felt material

Assorted Sizes of Paperclips

Tools:

Blade

E6000 Adhesive

White Glue that dries clear

Step 1:

Remove the foam stickers from their packaging.  Sort by the heart shapes by thickness.

Step 2: 

Take the stickers and place on a piece of felt material and trace the shape. Cut out shapes. These will be used as a backing for the Valentine Paper clips.

Step 3:

Take the ¼” thick foam stickers and place a sticker face down with the sticky side up.  Remove the part of the backing paper from the sticker and carefully place the paperclip onto the sticker.  Then squeeze a little E6000, around the paper clip and allow to dry.  

Then remove the rest of the sticker paper and adhere the felt to the foam heart sticker.  If the felt does not adhere well, just add a small amount of white glue. 

Step 4:

Using the blade*, take the 1/3” thick foam heart stickers and make a cut across the bottom like the one in the picture.  Please use care so that you don’t cut yourself during this process. 

Step 5:

Take the E6000 glue and put a little in the cut and add the paper clip.  Hold it tight so that it will adhere well. After a few minutes you can put it down and allow to the glue to finish drying.

Step 6:

 To finish, take off the paper backing and adhere the felt to the back of the heart. Put a little drop around the edges of the felt heart to tame down the bits of excess felt. Once it is dry it is easier to trim away.

Now you have a cute way to show off your valentine spirit with this easy project.  My kids are adding them to valentine cards, and small gifts.  I am using mine for a planner swap that is Valentine themed.

What types of Valentines Project have you been working on? I would to hear your project ideas.

NOTE:  *Always use care and follow the manufacturers instructions when using any type of blade.  Additionally, be cautious around children and put the blade away somewhere safe, so the blades don’t inadvertently injure them.

SaveSave

Jane Davenport Mermaid Markers Review

The Jane Davenport Mermaid Markers are water brush markers (ink filled brush pens) that have been filled with dye based inks that make it easy to use incorporate these beautiful ink colors into your mixed media projects.  I love working with brush pens and have purchased them in the past to fill with my favorite inks before.  I found that the price point on these markers of $39.99 at Michaels was quite reasonable.  Since I had a 40% off coupon when I purchased mine, this really lowered the price significantly.

One of the things that I first removed the Mermaid Markers from the packaging,

I notice there was a green stopper between the barrel and the ink reservoir.

First I removed the screw on lid. Then I removed the brush marker barrel from the ink reservoir.  I then removed the yellow green ring from the reservoir and carefully screwed all the pieces back together.

If you look at the clear plastic ink reservoir, you will notice a slightly indented area that has the words "push" in raised letters.

I pushed on the two sides of the plastic ink reservoir to release the ink.  That was not a good idea because as I squeezed over a scratch piece of paper, the mermaid makers squirted quite a bit of ink. The red was the biggest culprit, as the ink flows out quite easily from that brush marker.  The green below squirted a lot less ink.

It got all over my hands too.  I tried using a baby wipe to remove it but it only took a little bit of it off.  This makes me think that the ink will hold up well while using in my projects since it dried on my hand so quickly.

I figured out the right amount of pressure needed to squeeze the plastic so that ink would travel down the barrel and onto the brush part.  After that, I did not have any more problems with the ink squirting out in large amounts.

NOTE: I recommend storing these with the brush upright (brush at the top and ink reservoir at the bottom) to avoid any future leakage.  I store all my water brushes this way and have not had any problems with them.

I decided to do a couple of swatches on a variety of papers to see how the Jane Davenport Mermaid Markers would perform.  The first swatch is on Canson Cold Pressed Watercolor paper (140 lb).

The second Swatch is on the JD Marker Paper (this was from one of the butterfly refills) which is really smooth and the colors just goes onto it so beautifully.

The third swatch is on in my Hobonichi Weeks (Tomoe River paper) to see how the colors looked and if I had much bleed to the other side.

Tomoe River paper is ultra thin so I have to be careful what products I use in it.  I was so glad to see there was very little ghosting and no bleed through with these markers. Here is the back side of that page.  The yellow you see is my using a marker to highlight the dates on the page.

I also decided to do a simple swatch to see how the colors blended with each other.  The first swatch is on on Canson Cold Pressed Watercolor paper (140 lb).

The second is on Strathmore Mixed Media (90 lb) paper.

I got better results with the Canson than I did with the Strathmore paper, however the differences were quite minor.

The third swatch is on the Jane Davenport Marker Paper which is so smooth and really shows the beautiful pigments of these markers.

The last is a test of my adding water to the Jane Davenport Mermaid Brush marker swatches to see if I can get a nice watercolor affect.  I really like how easy these mixed with the smallest amount of water to get a nice effect.  The more water I added the lighter the pigment.

Mermaid Brush Pen ink mixed with water.

The regular price point is still pretty good when you consider the quality of the plastic water brush markers and the very pigmented inks that each pen has.  I did check Jane Davenport's Website and the Michaels website to see if there was any information on how light fast the inks are.  However I could not find any information regarding pigment or on how light fast each ink is for the Mermaid Markers Brush pen ink set.  The packaging did have the California Warning that states that this product contains chemicals known to the State of California to cause cancer, birth-defects or other reproductive harm.  So I will show the usual care whenever I do use these markers.







SaveSave

DIY Valentine Heart Earrings Tutorial

Create your own stylish Valentine Themed dangle earrings using easy to find supplies like Swarovski Crystals, glass beads, eye pins, head pins and ear wires with this easy DIY tutorial.  February is such a fun month and what better way to express the love I have for my family by making them some fun Valentine themed jewelry like this DIY Valentine Heart Earrings tutorial.  I picked up most of my supplies at Michaels, since I had a 20% off my entire purchase coupon.  The most expensive item I bought were the Swarovski Crystals (I bought two) which makes this a pretty affordable project.

Supplies:

Silver Ear Wires

Silver eye pins

Silver head pins

Silver jump rings

2 Swarovski Crystals

2 Heart shaped glass beads

Assorted 2mm glass pearl beads

Tools:

Round Nose Pliers

Long Nose Pliers

Wire Cutters

Fabric Mat

Step 1:

Gather your tools and supplies and place on fabric mat.  The mat keeps your beads from rolling of your working space and onto the floor.

Step 2:

Take one of the eye pins and load a pearl bead, a heart shaped bead followed by a pearl bead.  

Step 3:

Use the wire cutters to cut off the excess wire, making sure to leave at least a ¼ “ to make another loop. Using the long nose pliers make a 90 degree bend on the end of the eye pin.  Use the round nose pliers to form a loop with the remaining bit of wire.  Do this for the other eye pin.

Step 4:

Using a jump ring, attach these to the ear wires.

Step 5:

Take the head pin and load a Swarovski Crystals.  Use the wire cutters to cut off the excess wire, making sure to leave at least a ¼ inch of wire to make another loop. 

Step 6:

Then using the long nose pliers make a 90 degree bend on the end of the eye pin.  Use the round nose pliers to form a loop with the remaining bit of wire.  Do this for both head pins.

Step 7:

To finish, use the long nose pliers to attach the Swarovski Crystals dangles to the end of the earrings.  Make sure to close the loop tightly so they don’t fall of the end of the earrings.

Disclaimer: Always read the manufacturers directions and warnings to avoid being exposed to any products you could be allergic too.  And use tools carefully, especially around children.   I keep mine stored in a locked box so they can't get to them.